NEJE Master 20W Laser Engraver Machine App Control Wireless CNC Laser Engraving Cutter Mini Carver DIY Logo Marker Printer for Windows Mac iOS Android Wood Cutting,Large Working Area
【New Version 450nm 20W laser tube】New version 20W Master Laser CNC Cutter with APP Control (for Windows, Mac , Android) excels in fast cutting and can cut materials from 3mm to 8mm thickness. t can cut wood (3-8mm). Depth of engraving (0.5-3mm wood), thickness of cutting(2mm). 4Pin laser design with temperature sensing and surge protection design can effectively extend the laser life.
【Off-Line Working & Large Working Area】 Multi-functional keys can support offline work: press 1 time to reset automatically, press 2 times to perform frame positioning, press 3 times to start engraving, press 4 times to stop engraving. Engraving range: 150 * 150mm or 160mm x 160mm in GRBL mode , accuracy up to 0.075mm point distance, 2000*2000px ultra-clear printing effect
【Protection function】Built-in gyroscope protection device. When the laser engraver machine is running, the built-in gyroscope will record the working position at the beginning. In the event of an accidental touch or machine shift, the machine will automatically stop working to prevent an accident.$299.99
Specialized Motherboard with STM32 MCU It could preprocess 32 instructions, support baud rate as high as 921600, more powerful!
The Most Advanced 32Bits La-ser Engraver Firmware Ortur la-ser master firmware, smarter, faster, higher precision and easier to use.
Active Position Protection There is a G-sensor on the motherboard, if the machine detects unauthorized movement, the la-ser beam will stop.$389.99
【The Most Advanced Firmware】Ortur laser master firmware, smarter, faster, higher precision and easier to use. Specialized Motherboard with STM32 MCU. It could preprocess 32 instructions, support baud rate as high as 921600, more powerful! Engraving speed could be as high as 3000MM/Min. (If do not consider the laser carving result, the velocity of movement could be as high as 1000MM/S)
【Excellent safety protection】1. There is a G-sensor on the motherboard, if the machine detects unauthorized movement, the laser beam will stop. 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. If laser engraver is under control, but users forget to operate and keep the laser beam working, extra safety will cut off in case the motor stopped moving, to prevent fire.
【Perfectly compatible system】Use LaserGRBL or LightBurn (It’s the most popular paid carving software in the world, very easy to use). Supports Windows XP, 7, 8, 10, Mac OS, and Linux.$287.99